If fitted on its own, bolt through the top of the bedsides (four 8mm holes will require drilling), and are secured from underneath using the supplied bolts.
If fitted with our tri-fold tonneau cover, fit supplied brackets to the inside edge of the pickup bed using the supplied riv nuts (four 8mm holes will require drilling), then bolt the roll bar to the brackets.
This is a complete kit:- including all the fixings to fit the vehicle.
Please DO NOT use car cleaning products which contain TFR (Traffic Film Remover) as these will corrode the metal. Our warranty cannot cover products that have been cleaned with said solutions.
We strongly advise you check under the car at several intervals after the initial fitting to ensure safety. After 7 days, check and tighten any bolts and we recommend inspecting the bolts, brackets and boards at least once every 6 months.